OLLO Audio X1 Producing And Mixing Studio Headphones

• Ollo Audio X1 Dynamic, open-back, studio reference-class headphones with a flat frequency response that are adjusted for creating and mixing. The Realphones calibration plugin, which offers flat, spatial, and Harman goals for mixing, is included with the X1 Studio headphones. Additionally, the plugin adds virtual rooms to your monitoring choices.
• Since the calibration file is open data and not plugin-specific, it may be used with any DSP-enabled signal chain, regardless of the plugin (e.g., RME Total Mix or Neumann Mission).
• A powerful neodymium speaker with a 50 mm PU+PET membrane with a proprietary pattern, 32 ohms, 101 dBSPL @ 1 kHz, 3 dB RMS @ 0 dBu 1ohm output, and compatibility with smart devices.
• The IEC 60318-1 ear simulator was used to assess THD and second-order at <0.05% & <0.02% at 94 dB SPL @ 1 kHz with a sweep source. Using sweep and the IEC 60318-1 ear simulator, the frequency response variation in the range from 5 Hz to 22 kHz is approximately 9.8 dB SPL +/- 1 dB SPL.
• Interchangeable ear pads with a depth of 20 mm +/- 2.55 mm, an outside diameter of 95 mm, and an interior diameter of 57.5 mm

OLLO Audio X1 Overview

Ollo Audio X1 Headphones for linear monitoring and mixing

With an emphasis on editing, mixing, and mastering applications, the Ollo Audio X1 is a premium open-back over-ear headphone made for accurate monitoring tasks in studio settings. Its open-back design and high-performance components support its linear sound signature, which creates a natural and detailed picture and enables accurate assessment of levels, EQ, and spatial placement.

The USC-II calibration system, a software package that may be utilized system-wide or as a plug-in within a DAW, is included with the X1. In addition to providing optional listening profiles like studio, FOH, and car environments, as well as alternative target curves and a binaural mode, the software’s configuration file is meticulously accurate and based on measurements unique to each individual set of headphones. It also applies subtle EQ correction to further refine the frequency response. In Ollo’s Slovenian plant, every X1 is measured separately during manufacture to guarantee uniform performance among handcrafted units.

Designed with precision in mind

The carefully selected components of the Ollo Audio X1 directly contribute to its balanced, neutral sound. Its innovative PU/PET composite diaphragm and neodymium magnet-powered 50mm dynamic drivers span a frequency range of 5 Hz to 22 kHz.

Its performance is greatly enhanced by the open-back structure, which provides a more organic, uncompressed sound picture with a distinct sense of depth and space. A more realistic stereo field and better localization of individual parts within a mix are made possible by the drivers’ modest tilt inside the earcups. With a sensitivity of 101dB (SPL) and a low impedance of 32 ohms, the X1 may be powered by a variety of devices, including laptops, cellphones, and professional interfaces, without the need for specialised amplification.

A trustworthy resource

Producers, mix engineers, and sound technicians who need a reliable reference solution for crucial listening and mixing tasks—especially in settings with subpar acoustics—are the target market for the Ollo Audio X1. Professionals, who may confidently evaluate balance and dynamics and make judgments thanks to its neutral frequency response and regulated low distortion, which provide a constant and transparent audio picture.

The associated software provides various listening settings, target curves like the Harman profile, and a binaural mode. The USC-II calibration system applies modest corrective EQ using a measurement file unique to each device. These technologies facilitate processes for editing, mixing, and mastering where precision is more important than improvement. Experienced listeners looking for a natural, colourless reproduction could also find the X1 appealing.

Built for durability and intended for extended sessions

The Ollo Audio X1 1.0 blends long-term serviceability, smart ergonomics, and robust construction. Its handmade walnut earcups are complemented by velour and synthetic leather cushions that provide a balance between comfort and ventilation. During prolonged workouts, the self-adjusting headband made of stainless steel ensures a solid fit. The X1 helps lessen tiredness during extended editing, mixing, or mastering work because it weighs only 390g. Ollo Audio prioritizes long-term, sustainable usage; all essential parts, like the wire, ear cushions, headband, and even the drivers, are made to be interchangeable with common tools. A sturdy carrying bag is supplied for secure storage and transportation, and the detachable 2m cable ends in a 3.5mm connector with a 6.3mm adaptor.

OLLO Audio X1 Producing and Mixing Studio Headphones Features:

• Acoustic Design: Open-backed, circumaural studio reference headphones built for mixing and mastering.
• Angled Drivers: 50 mm dynamic neodymium drivers are tilted to mimic studio monitor speaker placement.
• Acoustic Performance: Delivers a transparent, ultra-flat frequency response stretching from 5Hz to 22kHz.
• Low Impedance: Rated at 32 ohms, making them easy to drive using laptops or smartphones.
• Calibration Software: Features the USC II plugin ecosystem, providing individual, unit-specific lab correction profiles.
• Spatial Audio: Designed specifically to support accurate monitoring for Dolby Atmos and spatial formats.
• Premium Materials: Uses CNC-machined American walnut earcups paired with a durable stainless steel headband.
• Breathable Pads: Outfitted with perforated acoustic foam hybrid ear pads to reduce ear fatigue.
• Modular Build: Built with a 100% user-serviceable design using standard household tools for repairs.
• Included Extras: Ships with a 2-meter detachable Y-cable and a custom hardshell travel case.