TASCAM’s US-4×4 combines great audio quality and ergonomic design for a powerful 4-in/4-out USB 2 audio interface.
Four of TASCAM’s Ultra-HDDA mic/line preamps provide up to 57dB of gain with nearly inaudible noise and distortion specs. The audio design features high-performance, musical components like NE5532 op amps for rich sound quality without coloring the source..

Equipped with Ultra-HDDA mic preamps that can input any sound source at a high sound quality

The main target customers for the US-4×4 is those, interested in music production, and especially beginners. Development was undertaken to deliver devices that are easy to use and understand, enabling users to simply connect them and immediately enjoy high-sound quality recording.

For mic preamps – a key determinant of sound quality – Ultra-HDDA mic preamps that achieve a stunning EIN rating of –125dBu have been installed. This was a result of careful consideration of user-friendliness when connecting the device with a condenser mic, as well as for dynamic microphones. As a result, the devices can be used in a wide range of applications – from vocal recording to stereo recording of piano and acoustic guitar. The eye-catching innovative design was the brainchild of a prominent German designer that has worked on numerous music production devices. The slightly angular design provides users with desktop recording that’s free from hassle.

FEATURES

• Four Ultra-HDDA mic preamplifiers
• Four XLR or TRS (MIC/LINE) inputs with full +48V phantom power
• Four TRS analog balanced outputs
• Two headphone outputs – each with 45mW/ch output power
• Connect with iPads and other iOS devices
• +48V phantom power for all inputs
• Two switchable high-impedance inputs
• Microphone preamp gain range of 57 dB
• Direct monitoring function for zero-latency monitoring
• Tough all-metal casing for durability
• Angled design provides excellent usability on a desktop
• Balanced analog TRS output jacks suitable for connection to powered monitors
• Standard TRS headphones output jack
• Separate controls for line and headphones output volumes
• MIDI input and output
• Ultra-HDDA (High Definition Discrete Architecture) mic preamps with −125dBu EIN
• NE5532 op-amps used at the audio input and output stages
• Up to 96kHz/24-bit recording
• Support for Windows and Mac OS X operating systems
• USB 2.0 computer connection
• Output sources can be selected in the setting panel
• Input sound monitoring can be set to stereo or mono
• Input muting function eliminates noise from unused inputs
• USB class compliant 2.0 support

• MIC IN :-IN 1-4
• Connector :-XLR-3-31(1:GND, 2:HOT, 3:COLD), BALANCED
• Input impedance:- 2.2k ohms
• Maximum input level(GAIN:MIN ) :- +8dBu (1.9467Vrms)
• INST IN:- IN 1-2
• Connector :- 6.3mm(1/4″)TS-jack(T：HOT, S：GND), UNBALANCED(When set to “INST” at MIC/LINE.INST switch)
• Input impedance :-1M ohms
• Maximum input level(GAIN:MIN ) :- +10dBV(3.162Vrms)
• MIDI IN / OUT :- Connector- Din 5-pin
• USB Connector :- USB B type 4-pin
• Power When connected PC :- USB bus powered
• Windows OS :- Windows 7(32-bit SP1, 64-bit SP1), Windows 8.0(32-bit, 64-bit), Windows 8.1(32-bit, 64-bit)
• Compatible computers :- Windows-compatible computer with a USB 2.0 port